First and foremost, you must determine which method
auto tech repair the bumper you prefer - welding or sewing and glue.
To determine this, you need to look bumper underside, where there is a formula PP, EPDM, and that will tell us about it. But chemical analysis data.
And when it comes easier, the bumpers are made of rubber - and rubberized nylon, which are badly welding, as well as very good bumpers that can be easily repair.Iz tools to repair bumpers is necessary, first of all, bench, set in a bright spot.
Carry welding need a soldering iron 40-60 watt. Also need a hairdryer, a knife, a small whetstone for the preparation of electrodes, small scissors, preferably for cutting metal, which are necessary for cutting electrodes and flat screwdriver.
In order to glue the bumper, need an awl, a rope to pull off the broken parts, fiberglass, rivets and gun for them, as well as glue. Best option glue - fresh epoxy resin with additives or polyester resin. Clay must be factory production and the latest issue.
The simplest type of repair bumpers is welding. Start by selecting a repair to the electrode - the right electrode gives a more reliable weld, which does not fall apart in preparation for painting. Then you should check whether you can weld bumper thereto same - to cut a piece from the inside and welded to the bumper.
Аz auto repair
It is desirable to use a uniform structure material - repair the bumper and a piece of the electrode should be identical, which further enables the smell emanating from the soldering iron, to understand the use of electrodes. Sometimes it is difficult to select the electrode, so you have do az auto repair using various remnants of not only the bumper, but the road grids.
More information on repair of the bumper, can be found at our site and automotive repair phoenix.
